Home Preparation Empennage Wings Fuselage Finish Kit Favorite Links W & B Calculator Van's Aircraft Email Me

Fuselage March 2007 Updates March 31, 2007 Canopy Slider Bracket - 1 hrs Drilled the slider standoff to a 2 x 4 and then drilled the standoff to the slidder strip. Used cleco clamps to hold the strip in place with the contour of the curve in the standoff. Drilled 2 more holes in the curve. I will leave the clamps on for a few days to set the curve some. This website was built to document my work in compliance with the FAA requirements needed to certify my aircraft. My experiences and comments are by no means to be considered as instructions on how to build any aircraft.