Home Preparation Empennage Wings Fuselage Engine Finish Kit Favorite Links W & B Calculator Van's Aircraft Email Me

Fuselage March 2008 Updates March 02, 2008 SL-30 & Fuel Pump.... - 2.0 hrs Today I cut both headset jacks from the pilot side off and resoldered. Removing about 2 inches to get the bad areas out. Reinstalled and tested. Perfect. Nice and clear. Next I added molex connectors to the fuel pump and wiring in the center section. Connected and tested. Perfect. No we are getting somewhere. Next I cut a 3.5 inch piece of tubing to tryout a new way of clearing up some space behind the pump. I slide out the flex lines giving more room. Looks like it may work but I will need to play with the lengths some more to check for sure. This website was built to document my work in compliance with the FAA requirements needed to certify my aircraft. My experiences and comments are by no means to be considered as instructions on how to build any aircraft.