Home Preparation Empennage Wings Fuselage Engine Finish Kit Favorite Links W & B Calculator Van's Aircraft Email Me

Fuselage July 2007 Updates July 25, 2007 Avionics Tray... - 2.0 hrs Well I was going to work on the last 2 brakelines but I really need to take the panel and forward fuse ribs back out to get enough room so I decided to cut the hole in the subpanel for the SL-40 Comm radio. First I removed the center rib and slid the center subpanel piece out. I marked up the hole location and used the dremel tool to cut the hole. Next I will use angle around the hole for stiffness. Need to go ahead and get the trays drilled into the side angles. This website was built to document my work in compliance with the FAA requirements needed to certify my aircraft. My experiences and comments are by no means to be considered as instructions on how to build any aircraft.