Home Preparation Empennage Wings Fuselage Engine Finish Kit Favorite Links W & B Calculator Van's Aircraft Email Me

Fuselage January 2008 Updates January 03, 2008 Flap Switch Bracket.... - 2.0 hrs Tonight I wanted to start getting the final things done to complete the panel install. Once the throttle quad goes in for good it really limits what I can do under the panel area. Still need to get the flap switch installed and the fuel pump wired. I am not putting the flap switch in the panel. Makes more sense to put it next to the throttle quad where you can reach it with your right finger with your hand on the throttle. I fabbed up a bracket for the switch that will mount under the bottom of the panel. This will get bolted to the angle that runs along the panel bottom. Once this was done I headed home to clean up, prime and paint. Really cold here at the hang tonight. This website was built to document my work in compliance with the FAA requirements needed to certify my aircraft. My experiences and comments are by no means to be considered as instructions on how to build any aircraft.