Finish Kit Update March 2012 Updates
March 25, 2012
Drilled Canopy Fairings to Glass...... - 4.0 hrs


Today I matched drilled the canopy side fairings to the canopy.

Next I removed the canopy and counter sunk the holes and enlarged to 5/16 per the plans and then refit everything back together. Duct taped the windscreen in place for fit.

The frame can now be painted and ready for riveting.



This website was built to document my work in compliance with the FAA requirements needed to certify my aircraft.
My experiences and comments are by no means to be considered as instructions on how to build any aircraft.