Home Preparation Empennage Wings Fuselage Engine Finish Kit Favorite Links W & B Calculator Van's Aircraft Email Me

Finish Kit Update February 2011 Updates February 25, 2011 EFII Fuel Lines ..... - 1.0 hrs Wanted to get down to the hangar tonight to make sure I could make up the forward and rear brakelines. Turns out that the one I almost made will work for both sides. For the front I needed one just an inch longer and just a bit more offset. So with that I cut a piece of tubing with the extra inch and flared both ends. I installed the front piece and then installed the rear and marked where to cut off for the flare. I removed the fuel valve and replaced the downward facing fitting with an elbow. This will allow for a straight shot into the fuel filter fitting. Once that was done I installed the rearline and shot some pics. This website was built to document my work in compliance with the FAA requirements needed to certify my aircraft. My experiences and comments are by no means to be considered as instructions on how to build any aircraft.