Home
Preparation
Empennage
Wings
Fuselage
Engine
Finish Kit
Favorite Links
W & B Calculator
Van's Aircraft
Email Me
|
|
Finish Kit Update April 2012 Updates
April 28, 2012
Lower Intersection Fairings and Windscreen...... - 5.0 hrs
Removed the windscreen and enlarged the holes and countersunk the holes for #6 screws. Next I tapped the rollbar for the #6 screws.
Next I trimmed to fit the lower intersection fairings. I had the left one in place so I removed the right one I had in place as I was switching back to the Fairings Inc style. The main reason for this is I like the look of the one piece style. They are clecoed in place for indexing the postion but these will be glassed in place so that when you remove the front have the front fairing comes with it.
I also touched up the paint on the rivets installed under the windscreen. I also repainted the spar channels to install in the cockpit now that everything is complete.
And last you work on the plane without taking time to listen to some tunes and watch airplanes landing while drinking a beverage. :)
This website was built to document my work in compliance with the FAA requirements
needed to certify my aircraft. My experiences and comments are by no means to be
considered as instructions on how to build any aircraft.
|
| |