Empennage June Updates
June 12, 2004
Vertical stabilizer main spar. Started work on the VS due to not receiving the bad replacement rib from Van's yet.

Used file to break the edges on the aluminum doubler. Clecoed the doubler to the spar and cleoced and final drilled holes in rear spar. Installed and drilled hinges in the rear spar.

Continued on to match drill and cleco the rest of the VS frame.

This website was built to document my work in compliance with the FAA requirements needed to certify my aircraft.
My experiences and comments are by no means to be considered as instructions on how to build any aircraft.